What Size Roll-Up Dish Rack Fits My Sink?
Use the open sink span and the support on both sides to size a roll-up rack.

Measure in the direction the rods will span
- Measure the open gap between the two edges that will support the rack. Measure along the strip where the rack will actually sit.
- Check that both ends can sit on flat, stable support. On an undermount sink, the support may be the countertop. A curved corner, raised lip, or drainboard can change where the rack rests.
- Measure perpendicular to the span to check faucet and handle clearance. Leave room to use the sink and remove the rack for cleaning.
Compare the rack with the manufacturer’s fit limits
The physical length of the rack includes the portion that rests on the sink or counter. Look for the maker’s maximum supported opening. If a listing and its setup notes give different limits, use the more conservative limit or check with the maker.
Example with a 15.5-inch opening
A 17.5-inch rack gives 2 inches of total overlap, or about 1 inch per end if centered. That arithmetic only describes the geometry. Check the maker’s fit guidance and make sure both ends actually rest flat before putting dishes on it.